Categories
Environmental Engineering

Mention these two steps about Yonker city in New York. The first step needs to b

Mention these two steps about Yonker city in New York. The first step needs to be about wastewater and its treatment and how it is reused. The second step needs to be about Air pollution and it’s sources, Control technologies, And standards.
1. You must describe how you will collect and treat all wastewater, and your city must
beneficially reuse at least 50% of the wastewater. You must describe the quality of the
treated wastewater in terms of key wastewater quality parameters and contaminants of
emerging concern.
2. You must identify potential sources of air pollution, and propose engineering controls
and/or policy changes to minimize air pollution. You must describe how you meet
National Ambient Air Quality Standards.
– I will attach pictures of what an example rating would be. I have attached an example of waste water and air pollution you could look at.

Categories
Environmental Engineering

Mention these two steps about Yonker city in New York. The first step needs to b

Mention these two steps about Yonker city in New York. The first step needs to be about wastewater and its treatment and how it is reused. The second step needs to be about Air pollution and it’s sources, Control technologies, And standards. 1. You must describe how you will collect and treat all wastewater, and your city must
beneficially reuse at least 50% of the wastewater. You must describe the quality of the
treated wastewater in terms of key wastewater quality parameters and contaminants of
emerging concern.
2. You must identify potential sources of air pollution, and propose engineering controls
and/or policy changes to minimize air pollution. You must describe how you meet
National Ambient Air Quality Standards.
– I will attach pictures of what an example rating would be. I have attached an example of waste water and air pollution you could look at.

Categories
Environmental Engineering

ONE assignment instruction, One Excel. View attached. iT IS basically using Exce

ONE assignment instruction, One Excel.
View attached.
iT IS basically using Excel! Read the file for at least once before you bid.

Categories
Environmental Engineering

However, it is likely there would have to be quite a few other objectives in order to actually get an estimate of overall costs and benefits for an entire psm program.

The next addition to the PSM Metrics Program is the Metrics Strategy. Here, you want to discuss the goals, objectives and the reasons for selecting the metrics you plan to present as they relate to the strategy behind your proposed Metrics Program. Begin the assignment with a one-paragraph introduction about the Metrics Strategy. An overall metrics strategy, for instance, may include; improving measurement of PSM program effectiveness to provide needed measures to ensure incidents are kept to a minimum so as to restrain costs and enhance stakeholder relations.
This may be a very useful strategy for a large refrigerated storage facility that has had some mishaps in the past couple of years, which ultimately, results in bad press and employees getting sent to the hospital for Ammonia chemical burns. It costs a lot of money to evacuate a facility, and maintaining good standing in the community is very important.
Follow the introduction with the three main sections: goals, objectives, and metrics selection. Once your strategy is complete, you will need to identify goals consistent with your Metrics Program strategy. Make sure you also discuss the rationale for each goal you select as it relates to the overall strategy statement for the Metrics Program. For instance, the goals section should list the goals, and then discuss how each goal is important to the organization and how and why each goal is consistent with the Metrics Program strategy.
One process safety metrics goal with the strategy statement summarized above, for instance, might include; identify overall PSM program costs as compared to benefits. Our metrics, in the present case, would want to focus on measuring the costs and benefits of the various program elements. An objective might be; quantify all outside contractor expenses related to PSM. Another might be: quantify internal labor costs related to PSM program administration. However, it is likely there would have to be quite a few other objectives in order to actually get an estimate of overall costs and benefits for an entire PSM program. This overall effort would be a formidable undertaking.
Finally, identify and describe metrics that would be consistent with your goals and objectives. You had some practice brainstorming some metrics in the previous unit concerning whether the metrics were lagging, leading, outcome, and so on. Here, however, you will need to focus more on your strategy, goals, and objectives to identify appropriate metrics.
Your metrics may be at the overall program level or specific to individual program elements. For instance, if your strategy focuses on reigning in contractors during outages at a large chemical plant, you would want to focus on the contractor requirements of the PSM standard. If your strategy includes a focus on mechanical integrity, you would obviously focus on that part of the standard. Make sure you can measure your objectives. If your strategy focuses more on establishing a facility culture that embraces safety and, more specifically, process safety as a core value, your goals, objectives, and metrics may be more focused on the overall program. This will help reassure top management that commitment, employee involvement, hazard analysis and control, employee training, and other related elements are being measured as they relate to process safety.
As you endeavor to demonstrate how a PSM program is helpful, keep in mind your target audience is skeptical about the value of a PSM program.
This is another piece that will be added to your written document demonstrating how a PSM metrics program is helpful to the organization.
This assignment should meet all of the following criteria:
Introduction to the Metrics Strategy
Goals listed
Discussion of the goals
Objectives listed
Discussion of the objectives
Metrics Selection listed
Discussion of the metrics selection
Also, this should be in APA format, no cover page at this point is required. The reference page is required for any material to include in module reading and/or any other resource(s) that support your objective for this assignment.

Categories
Environmental Engineering

How could you narrow your search further using a search engine?

Discussion: Search Results
Use two different search engines to conduct the same search. Pick one of the following phrases to search. Use quotation marks on the words to narrow your search:
“big-box store”
“largest supermarket chain”
“brick and mortar store”
“computers in business”
Search for your chosen phrase using Google. Next, use the same phrase to search on Microsoft Bing. Once you’ve run the same search on the two different engines, compare the results.
Ask yourself these questions for discussion:
Which search engine provided the most relevant results?
How could you narrow your search further using a search engine?
Requirements: Answer each question for the discussion in a minimum of 1 paragraph (100-200 words) Times New Roman Size 12 Font Double-Spaced APA Format Excluding the Title and Reference Pages
Please be sure to carefully follow the instructions
No plagiarism & No Course Hero & No Chegg. The assignment will be checked for originality via the Turnitin plagiarism tool
Please be sure to include at least one in-text citation in each paragraph

Categories
Environmental Engineering

Discussion of the objectives

The next addition to the PSM Metrics Program is the Metrics Strategy. Here, you want to discuss the goals, objectives and the reasons for selecting the metrics you plan to present as they relate to the strategy behind your proposed Metrics Program. Begin the assignment with a one-paragraph introduction about the Metrics Strategy. An overall metrics strategy, for instance, may include; improving measurement of PSM program effectiveness to provide needed measures to ensure incidents are kept to a minimum so as to restrain costs and enhance stakeholder relations.
This may be a very useful strategy for a large refrigerated storage facility that has had some mishaps in the past couple of years, which ultimately, results in bad press and employees getting sent to the hospital for Ammonia chemical burns. It costs a lot of money to evacuate a facility, and maintaining good standing in the community is very important.
Follow the introduction with the three main sections: goals, objectives, and metrics selection. Once your strategy is complete, you will need to identify goals consistent with your Metrics Program strategy. Make sure you also discuss the rationale for each goal you select as it relates to the overall strategy statement for the Metrics Program. For instance, the goals section should list the goals, and then discuss how each goal is important to the organization and how and why each goal is consistent with the Metrics Program strategy.
One process safety metrics goal with the strategy statement summarized above, for instance, might include; identify overall PSM program costs as compared to benefits. Our metrics, in the present case, would want to focus on measuring the costs and benefits of the various program elements. An objective might be; quantify all outside contractor expenses related to PSM. Another might be: quantify internal labor costs related to PSM program administration. However, it is likely there would have to be quite a few other objectives in order to actually get an estimate of overall costs and benefits for an entire PSM program. This overall effort would be a formidable undertaking.
Finally, identify and describe metrics that would be consistent with your goals and objectives. You had some practice brainstorming some metrics in the previous unit concerning whether the metrics were lagging, leading, outcome, and so on. Here, however, you will need to focus more on your strategy, goals, and objectives to identify appropriate metrics.
Your metrics may be at the overall program level or specific to individual program elements. For instance, if your strategy focuses on reigning in contractors during outages at a large chemical plant, you would want to focus on the contractor requirements of the PSM standard. If your strategy includes a focus on mechanical integrity, you would obviously focus on that part of the standard. Make sure you can measure your objectives. If your strategy focuses more on establishing a facility culture that embraces safety and, more specifically, process safety as a core value, your goals, objectives, and metrics may be more focused on the overall program. This will help reassure top management that commitment, employee involvement, hazard analysis and control, employee training, and other related elements are being measured as they relate to process safety.
As you endeavor to demonstrate how a PSM program is helpful, keep in mind your target audience is skeptical about the value of a PSM program.
This is another piece that will be added to your written document demonstrating how a PSM metrics program is helpful to the organization.
This assignment should meet all of the following criteria:
Introduction to the Metrics Strategy
Goals listed
Discussion of the goals
Objectives listed
Discussion of the objectives
Metrics Selection listed
Discussion of the metrics selection
Also, this should be in APA format, no cover page at this point is required. The reference page is required for any material to include in module reading and/or any other resource(s) that support your objective for this assignment.

Categories
Environmental Engineering

Which search engine provided the most relevant results?

Discussion: Search Results
Use two different search engines to conduct the same search. Pick one of the following phrases to search. Use quotation marks on the words to narrow your search:
“big-box store”
“largest supermarket chain”
“brick and mortar store”
“computers in business”
Search for your chosen phrase using Google. Next, use the same phrase to search on Microsoft Bing. Once you’ve run the same search on the two different engines, compare the results.
Ask yourself these questions for discussion:
Which search engine provided the most relevant results?
How could you narrow your search further using a search engine?
Requirements: Answer each question for the discussion in a minimum of 1 paragraph (100-200 words) Times New Roman Size 12 Font Double-Spaced APA Format Excluding the Title and Reference Pages
Please be sure to carefully follow the instructions
No plagiarism & No Course Hero & No Chegg. The assignment will be checked for originality via the Turnitin plagiarism tool
Please be sure to include at least one in-text citation in each paragraph

Categories
Environmental Engineering

Hello,

Hello,
I have a short and simple exercise based on Environmental Engineering.
The topic that the exercise will be on and cover will be: Activated Carbon Treatment.
The exercise is already uploaded and attached to the file upload section. Please take a look at the exercise to confirm that you are confident with the topic to know that you would be able to complete the exercise with the correct equations and formulas applied. I have notes from the Professor which go over the topics and provides formulas.
Please reach out to me with any questions and or concerns. Thank you!

Categories
Environmental Engineering

Hi, i have homework regarding leachate, and i need help doing it.

Hi, I have homework regarding leachate, and I need help doing it. Please texting or include excel or anything that is done as text into the doc so it can be turned in online. If the problem requires excel please include picture or the tables into the docs because before we have some problems requiring excel. So if it need, please include it.

Categories
Environmental Engineering

Need to handle data, map, and report is quite short.

Urban Planning – Case study database scoring
Instruction attached, it’s urban planing course, data related, case study.
Need to handle data, map, and report is quite short.
It should be easy for anyone who’s in geology field, or just data field.